Boldcore's wiki - User contributions [en]

Tyt th258 programming software

2020-07-17T06:57:11Z

Admin: /* TYT TH-258 Programming Software Download link */

= TYT TH-258 Programming Software =
It is very hard to obtain official programming software for that cute little radio.

Programming software for TYT TH-258 is available for download here: https://git.boldcore.eu/jhenzely/pub/raw/branch/master/TYT-TH258_programming.zip

Tyt th258 programming software

2020-07-17T06:56:57Z

Admin:

= TYT TH-258 Programming Software Download link=
It is very hard to obtain official programming software for that cute little radio.

Programming software for TYT TH-258 is available for download here: https://git.boldcore.eu/jhenzely/pub/raw/branch/master/TYT-TH258_programming.zip

Main Page

2020-07-14T07:55:06Z

Admin:

= Welcome to Boldcore's wiki ! =

I am using this wiki on my server to store useful information. 
When I was poor, young ang nice (now I am 24), without server in DC, simple paper notebook was sufficient,
by the time, the amount of information and knowledge increased. 

Group of hard drives connected in RAID is just better storage device than a human brain :))

Maybe You found information stated here useful. 
Have fun !

Contacts: 
Jaroslav Henzely 
jaroslav.henzely@boldcore.eu 
Slovakia (Europe) 
My CV: [https://boldcore.eu/ boldcore.eu]

Tyt th258 programming software

2020-07-13T11:16:02Z

Admin:

Tyt th258 programming software

2020-07-10T09:07:00Z

Admin: /* TYT TH-258 Programming Software */

= TYT TH-258 Programming Software =
It is very hard to obtain official programming software for that cute little radio.

Here: https://git.boldcore.eu/jhenzely/pub/raw/branch/master/TYT-TH258_programming.zip

Tyt th258 programming software

2020-07-10T09:06:41Z

Admin: /* TYT TH-258 Programming Software */

Tyt th258 programming software

2020-07-10T09:05:57Z

Admin: Created page with "= TYT TH-258 Programming Software = It is very hard to obtain official programming software for that cute little radio. Here: [https://git.boldcore.eu/jhenzely/pub/raw/branch..."

= TYT TH-258 Programming Software =
It is very hard to obtain official programming software for that cute little radio.

Here: [https://git.boldcore.eu/jhenzely/pub/raw/branch/master/TYT-TH258_programming.zip]

MediaWiki:Sidebar

2020-07-10T09:02:53Z

Admin:

* navigation
** mainpage|mainpage-description
** Zello_android_vox | Zello Android VOX
** VirtualHost_reverse_proxy|Apache vhost
** Add_this_to_Your_vimrc|Basic vimrc modification
** firewalld_rich_rule|Firewalld rich rule
** change_apache_umask_for_modified_files|Change Apache umask for modified files
** lvm_fsck_in_rescue_mode | LVM fsck in rescue mode
** wordpress_obvious_workaround|Wordpress obvious workaround
** squid_proxy|Squid proxy
** mongodb|MongoDB
** allow_app_in_selinux | Allow app in SELinux
** windows_install_telnet_client | Windows Install telnet-client
** apache_https_www | Apache http to s and www to non-www
** openvswitch_vxlan_hello_world_example | OpenvSwitch VXLAN Hello World example
** esxi_mac_error | ESXi MAC Address error
** windows_putty_ssh_tunnel | Windows PuTTY SSH Tunnel
** fail2ban_unban_ip | fail2ban unban IP address
** linux_proxy_variables | Linux Proxy variables
** pysnmp_otheroids | PySNMP do not dive to other OIDs
** compile_git_with_ssl_https_support | Compile git with https support
** tyt_th258_programming_software | TYT TH-258 Programming Software
** dns_spf_record | DNS SPF record
** vapormemo | vapormemo
** recentchanges-url|recentchanges
** randompage-url|randompage
** helppage|help
* SEARCH
* TOOLBOX
* LANGUAGES

Esxi mac error

2020-01-15T09:24:05Z

Admin:

==Intro==
In vmware ESXI You can get some auto-generated address when creating new VM NIC.

==The weird issue==
This works just fine, unless You want to import the VM on different host.
Then, an error message will appear, saying that the MAC address is reserved.

==Solution==

Navigate to .vmx file of the VM.
Add this to the end of file:

<pre>
ethernet0.checkMACAddress = "FALSE"
ethernet1.checkMACAddress = "FALSE"

ethernetX.checkMACAddress = "FALSE"

*WHere X is the eth number.
</pre>

Explicitly set the MAC:

<pre>
ethernet0.address = "00:0c:29:00:00:00"
ethernetX.address = "00:00:00:00:00:00"
</pre>

Update vib
<pre>
esxcli software vib update -v /vmfs/volumes/volume-uuid/Folder/esxui-signed.vib
</pre>

Update or install vibs manually and selectively, and only if there is strong justification or serious reason to do it.

I have experience with installation of vib provided by "certified vendor" which destroyed the whole ESXi host !

Zello android vox

2019-03-10T19:44:50Z

Admin:

=DEPRECATION Warning=
Zello VOX functionality is now supported by default. 
No workaround is required. 

https://support.zellowork.com/hc/en-us/articles/360006287053-Using-VOX-mode-on-Android

Thank You Zello !! 

=Zello Android VOX Support=

==Intro==
Zello is frequently used to link two-way radios with mobile phones or computers via the Internet.
TX and RX is usually controlled using VOX, which is NOT ideal, but very simple to implement. (You just need a passive cable)

Of course, VOX must be supported and configured on both sides; Zello and two-way radio transceiver.

===VOX feature in Zello===
Is only available in desktop PC app, which makes the whole system very complicated, vulnerable and a little more expensive.

For PC setup You need:
* PC w/ Windows
* License for Windows
* UMTS/LTE modem
* Router w/ USB modem support
* Audio Cable
* Two-way transceiver
* Low-noise power supply

Luckily, Zello is available for Android. Unfortunately, VOX feature is NOT available.

For Android phone setup You need:
* Android phone
* Audio Cable
* Two-way transceiver
* Low-noise power supply
* My naughty workaround to enable VOX feature

==TLDR --->> Enable VOX for Zello Android app <<--- ==
Step-by-step:

* Open Android Market and download application "Automate"
* Tap on menu icon (three gray vertical squares), tap "Import"
* [http://subory.boldcore.eu/prod_VOX.flo Import this workflow (click to download)]
* Tap on workflow called VOX, tap start
* Open Zello app, open contact where You want to broadcast. (screen with large MIC button)
* Test it like me on Youtube
* If it works don't touch it. Get away, leave it alone. OR Send me a message, try to fix it ;))

Final setup:
https://www.youtube.com/watch?v=n8xn8kWucDk

==Troubleshooting==
Check these:

* Automatic screen locking
* Insufficient permissions for Zello and Automate
* Automate sleeps in background

==How I managed to make this work ?==

Here is some official documentation:

https://support.zellowork.com/hc/en-us/articles/207385198-Zello-PTT-Button-Partner-Technical-Integration

© Jaroslav Henzely 2017

Zello android vox

2018-07-02T14:44:10Z

Admin:

=DEPRECATION Warning=
Zello VOX functionality is now supported by default. 
No workaround is required. 

https://support.zellowork.com/hc/en-us/articles/360006287053-Using-VOX-mode-on-Android

Thank You Zello ! 

=Zello Android VOX Support=

==Intro==
Zello is frequently used to link two-way radios with mobile phones or computers via the Internet.
TX and RX is usually controlled using VOX, which is NOT ideal, but very simple to implement. (You just need a passive cable)

Of course, VOX must be supported and configured on both sides; Zello and two-way radio transceiver.

===VOX feature in Zello===
Is only available in desktop PC app, which makes the whole system very complicated, vulnerable and a little more expensive.

For PC setup You need:
* PC w/ Windows
* License for Windows
* UMTS/LTE modem
* Router w/ USB modem support
* Audio Cable
* Two-way transceiver
* Low-noise power supply

Luckily, Zello is available for Android. Unfortunately, VOX feature is NOT available.

For Android phone setup You need:
* Android phone
* Audio Cable
* Two-way transceiver
* Low-noise power supply
* My naughty workaround to enable VOX feature

==TLDR --->> Enable VOX for Zello Android app <<--- ==
Step-by-step:

* Open Android Market and download application "Automate"
* Tap on menu icon (three gray vertical squares), tap "Import"
* [http://subory.boldcore.eu/prod_VOX.flo Import this workflow (click to download)]
* Tap on workflow called VOX, tap start
* Open Zello app, open contact where You want to broadcast. (screen with large MIC button)
* Test it like me on Youtube
* If it works don't touch it. Get away, leave it alone. OR Send me a message, try to fix it ;))

Final setup:
https://www.youtube.com/watch?v=n8xn8kWucDk

==Troubleshooting==
Check these:

* Automatic screen locking
* Insufficient permissions for Zello and Automate
* Automate sleeps in background

==How I managed to make this work ?==

Here is some official documentation:

https://support.zellowork.com/hc/en-us/articles/207385198-Zello-PTT-Button-Partner-Technical-Integration

© Jaroslav Henzely 2017

Zello android vox

2018-07-02T14:43:18Z

Admin:

=DEPRECATION Warning=
Zello VOX functionality is now supported by default. 
No workaround is required. 

https://support.zellowork.com/hc/en-us/articles/360006287053-Using-VOX-mode-on-Android

Thank You Zello ! 

=Zello Android VOX Support=

==Intro==
Zello is frequently used to link two-way radios with mobile phones or computers via the Internet.
TX and RX is usually controlled using VOX, which is NOT ideal, but very simple to implement. (You just need a passive cable)

Of course, VOX must be supported and configured on both sides; Zello and two-way radio transceiver.

===VOX feature in Zello===
Is only available in desktop PC app, which makes the whole system very complicated, vulnerable and a little more expensive.

For PC setup You need:
* PC w/ Windows
* License for Windows
* UMTS/LTE modem
* Router w/ USB modem support
* Audio Cable
* Two-way transceiver
* Low-noise power supply

Luckily, Zello is available for Android. Unfortunately, VOX feature is NOT available.

For Android phone setup You need:
* Android phone
* Audio Cable
* Two-way transceiver
* Low-noise power supply
* My naughty workaround to enable VOX feature

==TLDR --->> Enable VOX for Zello Android app <<--- ==
Step-by-step:

* Open Android Market and download application "Automate"
* Tap on menu icon (three gray vertical squares), tap "Import"
* [http://subory.boldcore.eu/prod_VOX.flo Import this workflow (click to download)]
* Tap on workflow called VOX, tap start
* Open Zello app, open contact where You want to broadcast. (screen with large MIC button)
* Test it like me on Youtube
* If it works don't touch it. Get away, leave it alone. OR Send me a message, try to fix it ;))

Final setup:
https://www.youtube.com/watch?v=n8xn8kWucDk

==Troubleshooting==
Check these:

* Automatic screen locking
* Insufficient permissions for Zello and Automate
* Automate sleeps in background

==How I managed to make this work ?==

Here is some official documentation:

https://support.zellowork.com/hc/en-us/articles/207385198-Zello-PTT-Button-Partner-Technical-Integration

© Jaroslav Henzely 2017

Zello android vox

2018-07-02T14:43:07Z

Admin:

=DEPRECATION Warning=
Zello VOX functionality is now supported by default. 
No workaround is required. 

https://support.zellowork.com/hc/en-us/articles/360006287053-Using-VOX-mode-on-Android

Thank You Zello ! 

=Zello Android VOX Support=

==Intro==
Zello is frequently used to link two-way radios with mobile phones or computers via the Internet.
TX and RX is usually controlled using VOX, which is NOT ideal, but very simple to implement. (You just need a passive cable)

Of course, VOX must be supported and configured on both sides; Zello and two-way radio transceiver.

===VOX feature in Zello===
Is only available in desktop PC app, which makes the whole system very complicated, vulnerable and a little more expensive.

For PC setup You need:
* PC w/ Windows
* License for Windows
* UMTS/LTE modem
* Router w/ USB modem support
* Audio Cable
* Two-way transceiver
* Low-noise power supply

Luckily, Zello is available for Android. Unfortunately, VOX feature is NOT available.

For Android phone setup You need:
* Android phone
* Audio Cable
* Two-way transceiver
* Low-noise power supply
* My naughty workaround to enable VOX feature

==TLDR --->> Enable VOX for Zello Android app <<--- ==
Step-by-step:

* Open Android Market and download application "Automate"
* Tap on menu icon (three gray vertical squares), tap "Import"
* [http://subory.boldcore.eu/prod_VOX.flo Import this workflow (click to download)]
* Tap on workflow called VOX, tap start
* Open Zello app, open contact where You want to broadcast. (screen with large MIC button)
* Test it like me on Youtube
* If it works don't touch it. Get away, leave it alone. OR Send me a message, try to fix it ;))

Final setup:
https://www.youtube.com/watch?v=n8xn8kWucDk

==Troubleshooting==
Check these:

* Automatic screen locking
* Insufficient permissions for Zello and Automate
* Automate sleeps in background

==How I managed to make this work ?==

Here is some official documentation:

https://support.zellowork.com/hc/en-us/articles/207385198-Zello-PTT-Button-Partner-Technical-Integration

© Jaroslav Henzely 2017

Zello android vox

2018-07-02T14:42:54Z

Admin:

=DEPRECATION Warning=
Zello VOX functionality is now supported by default. 
No workaround is required. 

https://support.zellowork.com/hc/en-us/articles/360006287053-Using-VOX-mode-on-Android

Thank You Zello ! 

=Zello Android VOX Support=

==Intro==
Zello is frequently used to link two-way radios with mobile phones or computers via the Internet.
TX and RX is usually controlled using VOX, which is NOT ideal, but very simple to implement. (You just need a passive cable)

Of course, VOX must be supported and configured on both sides; Zello and two-way radio transceiver.

===VOX feature in Zello===
Is only available in desktop PC app, which makes the whole system very complicated, vulnerable and a little more expensive.

For PC setup You need:
* PC w/ Windows
* License for Windows
* UMTS/LTE modem
* Router w/ USB modem support
* Audio Cable
* Two-way transceiver
* Low-noise power supply

Luckily, Zello is available for Android. Unfortunately, VOX feature is NOT available.

For Android phone setup You need:
* Android phone
* Audio Cable
* Two-way transceiver
* Low-noise power supply
* My naughty workaround to enable VOX feature

==TLDR --->> Enable VOX for Zello Android app <<--- ==
Step-by-step:

* Open Android Market and download application "Automate"
* Tap on menu icon (three gray vertical squares), tap "Import"
* [http://subory.boldcore.eu/prod_VOX.flo Import this workflow (click to download)]
* Tap on workflow called VOX, tap start
* Open Zello app, open contact where You want to broadcast. (screen with large MIC button)
* Test it like me on Youtube
* If it works don't touch it. Get away, leave it alone. OR Send me a message, try to fix it ;))

Final setup:
https://www.youtube.com/watch?v=n8xn8kWucDk

==Troubleshooting==
Check these:

* Automatic screen locking
* Insufficient permissions for Zello and Automate
* Automate sleeps in background

==How I managed to make this work ?==

Here is some official documentation:

https://support.zellowork.com/hc/en-us/articles/207385198-Zello-PTT-Button-Partner-Technical-Integration

© Jaroslav Henzely 2017

Zello android vox

2018-07-02T14:42:05Z

Admin:

=DEPRECATION Warning=
Zello VOX functionality is now supported by default 

https://support.zellowork.com/hc/en-us/articles/360006287053-Using-VOX-mode-on-Android

Thank You Zello ! 

=Zello Android VOX Support=

==Intro==
Zello is frequently used to link two-way radios with mobile phones or computers via the Internet.
TX and RX is usually controlled using VOX, which is NOT ideal, but very simple to implement. (You just need a passive cable)

Of course, VOX must be supported and configured on both sides; Zello and two-way radio transceiver.

===VOX feature in Zello===
Is only available in desktop PC app, which makes the whole system very complicated, vulnerable and a little more expensive.

For PC setup You need:
* PC w/ Windows
* License for Windows
* UMTS/LTE modem
* Router w/ USB modem support
* Audio Cable
* Two-way transceiver
* Low-noise power supply

Luckily, Zello is available for Android. Unfortunately, VOX feature is NOT available.

For Android phone setup You need:
* Android phone
* Audio Cable
* Two-way transceiver
* Low-noise power supply
* My naughty workaround to enable VOX feature

==TLDR --->> Enable VOX for Zello Android app <<--- ==
Step-by-step:

* Open Android Market and download application "Automate"
* Tap on menu icon (three gray vertical squares), tap "Import"
* [http://subory.boldcore.eu/prod_VOX.flo Import this workflow (click to download)]
* Tap on workflow called VOX, tap start
* Open Zello app, open contact where You want to broadcast. (screen with large MIC button)
* Test it like me on Youtube
* If it works don't touch it. Get away, leave it alone. OR Send me a message, try to fix it ;))

Final setup:
https://www.youtube.com/watch?v=n8xn8kWucDk

==Troubleshooting==
Check these:

* Automatic screen locking
* Insufficient permissions for Zello and Automate
* Automate sleeps in background

==How I managed to make this work ?==

Here is some official documentation:

https://support.zellowork.com/hc/en-us/articles/207385198-Zello-PTT-Button-Partner-Technical-Integration

© Jaroslav Henzely 2017

Lvm fsck in rescue mode

2018-05-15T12:39:51Z

Admin:

In rescue mode on RedHat/CentOS LVs are in "INACTIVE" mode. 
To "activate" them enter the following commands:

<pre>
## Scan for LVs
lvm vgscan -v

## Make them "active":
lvm vgchange -a y
</pre>

Lvm fsck in rescue mode

2018-05-15T12:39:38Z

Admin:

In rescue mode on RedHat/CentOS LVs are in "INACTIVE" mode.
To "activate" them enter the following commands:

<pre>
## Scan for LVs
lvm vgscan -v

## Make them "active":
lvm vgchange -a y
</pre>

Lvm fsck in rescue mode

2018-05-15T12:39:31Z

Admin: Created page with "In rescue mode on RedHat/CentOS LVs are in "INACTIVE" mode. To "activate" them enter the following commands: <pre> ## Scan for LVs lvm vgscan -v ## Make them "active": lvm..."

In rescue mode on RedHat/CentOS LVs are in "INACTIVE" mode.

To "activate" them enter the following commands:

<pre>
## Scan for LVs
lvm vgscan -v

## Make them "active":
lvm vgchange -a y
</pre>

MediaWiki:Sidebar

2018-05-15T12:35:42Z

Admin:

* navigation
** mainpage|mainpage-description
** Zello_android_vox | Zello Android VOX
** VirtualHost_reverse_proxy|Apache vhost
** Add_this_to_Your_vimrc|Basic vimrc modification
** firewalld_rich_rule|Firewalld rich rule
** change_apache_umask_for_modified_files|Change Apache umask for modified files
** lvm_fsck_in_rescue_mode | LVM fsck in rescue mode
** wordpress_obvious_workaround|Wordpress obvious workaround
** squid_proxy|Squid proxy
** mongodb|MongoDB
** allow_app_in_selinux | Allow app in SELinux
** windows_install_telnet_client | Windows Install telnet-client
** apache_https_www | Apache http to s and www to non-www
** openvswitch_vxlan_hello_world_example | OpenvSwitch VXLAN Hello World example
** esxi_mac_error | ESXi MAC Address error
** windows_putty_ssh_tunnel | Windows PuTTY SSH Tunnel
** fail2ban_unban_ip | fail2ban unban IP address
** linux_proxy_variables | Linux Proxy variables
** pysnmp_otheroids | PySNMP do not dive to other OIDs
** compile_git_with_ssl_https_support | Compile git with https support
** dns_spf_record | DNS SPF record
** vapormemo | vapormemo
** recentchanges-url|recentchanges
** randompage-url|randompage
** helppage|help
* SEARCH
* TOOLBOX
* LANGUAGES

Allow app in selinux

2018-05-15T07:32:34Z

Admin:

Usually, we just disable SELinux, instead of configuring it --lazy way :D 

I think, that enabling application using the following commands is a bit better approach.

<pre>
ausearch -c "your_application_name" | audit2alllow -M enable-app
semodule -i enable-app.pp
</pre>

Then restart the service and it should work with no issues.

Allow app in selinux

2018-05-09T22:32:30Z

Admin:

Usually, we just disable SELinux, instead of configuring it --lazy way :D 

I think, that enabling application using the following commands is a bit better approach.

<pre>
ausearch -c "application" | audit2alllow -M enable-app
semodule -i enable-app.pp
</pre>

Then restart the service and it should work with no issues.

Allow app in selinux

2018-05-09T22:32:09Z

Admin: Created page with "Usually, we just disable SELinux, instead of configuring it --lazy way :D I think, that enabling application using the following commands is better approach. <pre> ause..."

Usually, we just disable SELinux, instead of configuring it --lazy way :D 

I think, that enabling application using the following commands is better approach.

<pre>
ausearch -c "application" | audit2alllow -M enable-app
semodule -i enable-app.pp
</pre>

Then restart the service and it should work with no issues.

MediaWiki:Sidebar

2018-05-09T22:18:56Z

Admin:

* navigation
** mainpage|mainpage-description
** Zello_android_vox | Zello Android VOX
** VirtualHost_reverse_proxy|Apache vhost
** Add_this_to_Your_vimrc|Basic vimrc modification
** firewalld_rich_rule|Firewalld rich rule
** change_apache_umask_for_modified_files|Change Apache umask for modified files
** wordpress_obvious_workaround|Wordpress obvious workaround
** squid_proxy|Squid proxy
** mongodb|MongoDB
** allow_app_in_selinux | Allow app in SELinux
** windows_install_telnet_client | Windows Install telnet-client
** apache_https_www | Apache http to s and www to non-www
** openvswitch_vxlan_hello_world_example | OpenvSwitch VXLAN Hello World example
** esxi_mac_error | ESXi MAC Address error
** windows_putty_ssh_tunnel | Windows PuTTY SSH Tunnel
** fail2ban_unban_ip | fail2ban unban IP address
** linux_proxy_variables | Linux Proxy variables
** pysnmp_otheroids | PySNMP do not dive to other OIDs
** compile_git_with_ssl_https_support | Compile git with https support
** dns_spf_record | DNS SPF record
** vapormemo | vapormemo
** recentchanges-url|recentchanges
** randompage-url|randompage
** helppage|help
* SEARCH
* TOOLBOX
* LANGUAGES

Vapormemo

2018-04-28T15:19:03Z

Admin:

Me was trying to explain to my colleague what is vaporwave.

==Have fun !==

<pre>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8;
format=flowed
Content-Transfer-Encoding: 8bit
Date: Sat, 06 Jan 2018 00:06:23 +0100
From: Jaroslav Henzely <jaroslav.henzely@boldcore.eu>
To:
Subject: Vaporwave [Fiji bottled water]
Message-ID: <6b45a3196340ac1b81fb75dc961c765e@boldcore.eu>
X-Sender: jaroslav.henzely@boldcore.eu
User-Agent: Roundcube Webmail

Ahoj, tu je celkom pekne napisane, resp. je to mala napoveda k
pochopeniu tej Fiji vody. (pisal som posledny odsek som pre slovensku
wikipediu)

https://sk.wikipedia.org/wiki/Vaporwave

Odoslal si posledny fax a opustas kancelariu. Cestou z prace si pozicias
kazetu, platis kartou. Pri zadavani PINu si vsimnes, ze predavacka je na
nohach uz minimalne 12 hodin. Tak ako ty.
Prides domov, zapnes klimu, vypnes pager, kabel z telefonu si pripojil
do modemu.
Otvoris Cherry Colu a plechovku s ananasom. Zapalis si cigaretu. Byvas
sam vo velkom apartmane na Fifth avenue. V pondelok Ti pride z AT&T
vysoky ucet, pretoze si mal v PC dialer.
Si velmi zaneprazdneny a to neustale pipanie modemu si si pomylil s
kuchynskym radiom. Uvedomis si, ze v konecnom dosledku nemas o nic lepsi
zivot ako ta predavacka zo vcera :D
uups, teda z piatku. Aaaa vikend v pici zas cely tyzden do roboty :D :D

V pondelok rano vidis ako nad Manhattanom stupa husty dym. Mal si tam
kancel.
Cely akciovy trh sa prepadol, prisiel si o vsetko a tak zacinas pracovat
vo videopozicovni.

Ozenis sa s tou predavackou. Pracujes tam. S nastupom Netflixu vsak
videopozicovna skrachuje.
</pre>

Vapormemo

2018-04-26T10:26:03Z

Admin:

Me was trying to explain to my colleague what is vaporwave.

<pre>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8;
format=flowed
Content-Transfer-Encoding: 8bit
Date: Sat, 06 Jan 2018 00:06:23 +0100
From: Jaroslav Henzely <jaroslav.henzely@boldcore.eu>
To:
Subject: Vaporwave [Fiji bottled water]
Message-ID: <6b45a3196340ac1b81fb75dc961c765e@boldcore.eu>
X-Sender: jaroslav.henzely@boldcore.eu
User-Agent: Roundcube Webmail

Ahoj, tu je celkom pekne napisane, resp. je to mala napoveda k
pochopeniu tej Fiji vody. (pisal som posledny odsek som pre slovensku
wikipediu)

https://sk.wikipedia.org/wiki/Vaporwave

Odoslal si posledny fax a opustas kancelariu. Cestou z prace si pozicias
kazetu, platis kartou. Pri zadavani PINu si vsimnes, ze predavacka je na
nohach uz minimalne 12 hodin. Tak ako ty.
Prides domov, zapnes klimu, vypnes pager, kabel z telefonu si pripojil
do modemu.
Otvoris Cherry Colu a plechovku s ananasom. Zapalis si cigaretu. Byvas
sam vo velkom apartmane na Fifth avenue. V pondelok Ti pride z AT&T
vysoky ucet, pretoze si mal v PC dialer.
Si velmi zaneprazdneny a to neustale pipanie modemu si si pomylil s
kuchynskym radiom. Uvedomis si, ze v konecnom dosledku nemas o nic lepsi
zivot ako ta predavacka zo vcera :D
uups, teda z piatku. Aaaa vikend v pici zas cely tyzden do roboty :D :D

V pondelok rano vidis ako nad Manhattanom stupa husty dym. Mal si tam
kancel.
Cely akciovy trh sa prepadol, prisiel si o vsetko a tak zacinas pracovat
vo videopozicovni.

Ozenis sa s tou predavackou. Pracujes tam. S nastupom Netflixu vsak
videopozicovna skrachuje.
</pre>

Vapormemo

2018-04-26T10:25:43Z

Admin: Created page with "Me was trying to explain to my colleague what is vaporwave. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit Date: Sa..."

Me was trying to explain to my colleague what is vaporwave.

MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8;
format=flowed
Content-Transfer-Encoding: 8bit
Date: Sat, 06 Jan 2018 00:06:23 +0100
From: Jaroslav Henzely <jaroslav.henzely@boldcore.eu>
To:
Subject: Vaporwave [Fiji bottled water]
Message-ID: <6b45a3196340ac1b81fb75dc961c765e@boldcore.eu>
X-Sender: jaroslav.henzely@boldcore.eu
User-Agent: Roundcube Webmail

Ahoj, tu je celkom pekne napisane, resp. je to mala napoveda k
pochopeniu tej Fiji vody. (pisal som posledny odsek som pre slovensku
wikipediu)

https://sk.wikipedia.org/wiki/Vaporwave

Odoslal si posledny fax a opustas kancelariu. Cestou z prace si pozicias
kazetu, platis kartou. Pri zadavani PINu si vsimnes, ze predavacka je na
nohach uz minimalne 12 hodin. Tak ako ty.
Prides domov, zapnes klimu, vypnes pager, kabel z telefonu si pripojil
do modemu.
Otvoris Cherry Colu a plechovku s ananasom. Zapalis si cigaretu. Byvas
sam vo velkom apartmane na Fifth avenue. V pondelok Ti pride z AT&T
vysoky ucet, pretoze si mal v PC dialer.
Si velmi zaneprazdneny a to neustale pipanie modemu si si pomylil s
kuchynskym radiom. Uvedomis si, ze v konecnom dosledku nemas o nic lepsi
zivot ako ta predavacka zo vcera :D
uups, teda z piatku. Aaaa vikend v pici zas cely tyzden do roboty :D :D

V pondelok rano vidis ako nad Manhattanom stupa husty dym. Mal si tam
kancel.
Cely akciovy trh sa prepadol, prisiel si o vsetko a tak zacinas pracovat
vo videopozicovni.

Ozenis sa s tou predavackou. Pracujes tam. S nastupom Netflixu vsak
videopozicovna skrachuje.

MediaWiki:Sidebar

2018-04-26T10:24:17Z

Admin:

* navigation
** mainpage|mainpage-description
** Zello_android_vox | Zello Android VOX
** VirtualHost_reverse_proxy|Apache vhost
** Add_this_to_Your_vimrc|Basic vimrc modification
** firewalld_rich_rule|Firewalld rich rule
** change_apache_umask_for_modified_files|Change Apache umask for modified files
** wordpress_obvious_workaround|Wordpress obvious workaround
** squid_proxy|Squid proxy
** mongodb|MongoDB
** windows_install_telnet_client | Windows Install telnet-client
** apache_https_www | Apache http to s and www to non-www
** openvswitch_vxlan_hello_world_example | OpenvSwitch VXLAN Hello World example
** esxi_mac_error | ESXi MAC Address error
** windows_putty_ssh_tunnel | Windows PuTTY SSH Tunnel
** fail2ban_unban_ip | fail2ban unban IP address
** linux_proxy_variables | Linux Proxy variables
** pysnmp_otheroids | PySNMP do not dive to other OIDs
** compile_git_with_ssl_https_support | Compile git with https support
** dns_spf_record | DNS SPF record
** vapormemo | vapormemo
** recentchanges-url|recentchanges
** randompage-url|randompage
** helppage|help
* SEARCH
* TOOLBOX
* LANGUAGES

Windows install telnet client

2018-04-19T07:56:28Z

Admin: Created page with "Whoooa ! Yes, it is possible. Telnet protocol is now obsolete (or lets say forbidden) because it does not provide any level of security. Data are simply transfered..."

Whoooa ! 
Yes, it is possible. 

Telnet protocol is now obsolete (or lets say forbidden) because it does not provide any level of security. Data are simply transfered in plaintext. Too bad if you want to keep your password safe. 

We are using SSH for UNIX and GNU/Linux and WinRM for Windozes. So, why telnet-client on Windows ? 
It is the way how to check if service is accessible from client side.

=== TL;DR ===

<pre>
Add-WindowsFeature telnet-client
</pre>

That's it. Don't forget to run Powershell with Admin privileges.

MediaWiki:Sidebar

2018-04-19T07:40:10Z

Admin:

* navigation
** mainpage|mainpage-description
** Zello_android_vox | Zello Android VOX
** VirtualHost_reverse_proxy|Apache vhost
** Add_this_to_Your_vimrc|Basic vimrc modification
** firewalld_rich_rule|Firewalld rich rule
** change_apache_umask_for_modified_files|Change Apache umask for modified files
** wordpress_obvious_workaround|Wordpress obvious workaround
** squid_proxy|Squid proxy
** mongodb|MongoDB
** windows_install_telnet_client | Windows Install telnet-client
** apache_https_www | Apache http to s and www to non-www
** openvswitch_vxlan_hello_world_example | OpenvSwitch VXLAN Hello World example
** esxi_mac_error | ESXi MAC Address error
** windows_putty_ssh_tunnel | Windows PuTTY SSH Tunnel
** fail2ban_unban_ip | fail2ban unban IP address
** linux_proxy_variables | Linux Proxy variables
** pysnmp_otheroids | PySNMP do not dive to other OIDs
** compile_git_with_ssl_https_support | Compile git with https support
** dns_spf_record | DNS SPF record
** recentchanges-url|recentchanges
** randompage-url|randompage
** helppage|help
* SEARCH
* TOOLBOX
* LANGUAGES

Openvswitch vxlan hello world example

2018-04-13T11:34:04Z

Admin:

== Openvswitch VXLAN Hello World example ==
This is very cool. You can create simple and efficient L2 ethernet tunnel between two hosts with L3 (IP) connection. 
Later you can add physical interface to the ovs bridge, connect dumb physical L2 switch and interconnect two sites.

=== Open port on ffiewall ===
L2 Ethernet frames are encapsulated in L4 UDP datagrams. Port is 4789.
<pre>
firewall-cmd --add-port=4789/udp --zone=public --permanent
</pre>

=== Create virtual switch and VXLANs ===
<pre>
ovs-vsctl add-br br0
ovs-vsctl add-port br0 vxlan0 -- set interface vxlan0 type=vxlan options:remote_ip=192.168.80.30
ovs-vsctl add-port br0 vxlan0 -- set interface vxlan0 type=vxlan options:remote_ip=192.168.80.20
</pre>

br0 is the virtual switch (bridge) where you can "plug" virtual and physical interfaces
remote_ip is your server's public IP (private in this case, just for testing in LAB)

=== Create and connect internal virtual interface to vitual switch ===
<pre>
ovs-vsctl add-port br0 vi0 -- set Interface vi0 type=internal
ip addr add 192.168.120.10/24 dev vi0
ifconfig vi0 up
</pre>

<pre>
ovs-vsctl add-port br0 vi0 -- set Interface vi0 type=internal
ip addr add 192.168.120.20/24 dev vi0
ifconfig vi0 up
</pre>

=== Tesing ===
Try to ping each other's IP address of vi0. (192.168.120.10 and 192.168.120.20)

Openvswitch vxlan hello world example

2018-04-13T11:33:39Z

Admin: Created page with " == Openvswitch VXLAN Hello World example == This is very cool. You can create simple and efficient L2 ethernet tunnel between two hosts with L3 (IP) connection. Later yo..."

== Openvswitch VXLAN Hello World example ==

This is very cool. You can create simple and efficient L2 ethernet tunnel between two hosts with L3 (IP) connection. 
Later you can add physical interface to the ovs bridge, connect dumb physical L2 switch and interconnect two sites.

=== Open port on ffiewall ===

L2 Ethernet frames are encapsulated in L4 UDP datagrams. Port is 4789.
<pre>
firewall-cmd --add-port=4789/udp --zone=public --permanent
</pre>

=== Create virtual switch and VXLANs ===

<pre>
ovs-vsctl add-br br0
ovs-vsctl add-port br0 vxlan0 -- set interface vxlan0 type=vxlan options:remote_ip=192.168.80.30
ovs-vsctl add-port br0 vxlan0 -- set interface vxlan0 type=vxlan options:remote_ip=192.168.80.20
</pre>

br0 is the virtual switch (bridge) where you can "plug" virtual and physical interfaces
remote_ip is your server's public IP (private in this case, just for testing in LAB)

=== Create and connect internal virtual interface to vitual switch ===

<pre>
ovs-vsctl add-port br0 vi0 -- set Interface vi0 type=internal
ip addr add 192.168.120.10/24 dev vi0
ifconfig vi0 up
</pre>

<pre>
ovs-vsctl add-port br0 vi0 -- set Interface vi0 type=internal
ip addr add 192.168.120.20/24 dev vi0
ifconfig vi0 up
</pre>

=== Tesing ===
Try to ping each other's IP address of vi0. (192.168.120.10 and 192.168.120.20)

MediaWiki:Sidebar

2018-04-13T10:40:36Z

Admin:

* navigation
** mainpage|mainpage-description
** Zello_android_vox | Zello Android VOX
** VirtualHost_reverse_proxy|Apache vhost
** Add_this_to_Your_vimrc|Basic vimrc modification
** firewalld_rich_rule|Firewalld rich rule
** change_apache_umask_for_modified_files|Change Apache umask for modified files
** wordpress_obvious_workaround|Wordpress obvious workaround
** squid_proxy|Squid proxy
** mongodb|MongoDB
** apache_https_www | Apache http to s and www to non-www
** openvswitch_vxlan_hello_world_example | OpenvSwitch VXLAN Hello World example
** esxi_mac_error | ESXi MAC Address error
** windows_putty_ssh_tunnel | Windows PuTTY SSH Tunnel
** fail2ban_unban_ip | fail2ban unban IP address
** linux_proxy_variables | Linux Proxy variables
** pysnmp_otheroids | PySNMP do not dive to other OIDs
** compile_git_with_ssl_https_support | Compile git with https support
** dns_spf_record | DNS SPF record
** recentchanges-url|recentchanges
** randompage-url|randompage
** helppage|help
* SEARCH
* TOOLBOX
* LANGUAGES

MediaWiki:Sidebar

2018-04-12T13:57:05Z

Admin:

* navigation
** mainpage|mainpage-description
** Zello_android_vox | Zello Android VOX
** VirtualHost_reverse_proxy|Apache vhost
** Add_this_to_Your_vimrc|Basic vimrc modification
** firewalld_rich_rule|Firewalld rich rule
** change_apache_umask_for_modified_files|Change Apache umask for modified files
** wordpress_obvious_workaround|Wordpress obvious workaround
** squid_proxy|Squid proxy
** mongodb|MongoDB
** apache_https_www | Apache http to s and www to non-www
** create_dummy_interface | Create dummy interface
** esxi_mac_error | ESXi MAC Address error
** windows_putty_ssh_tunnel | Windows PuTTY SSH Tunnel
** fail2ban_unban_ip | fail2ban unban IP address
** linux_proxy_variables | Linux Proxy variables
** pysnmp_otheroids | PySNMP do not dive to other OIDs
** compile_git_with_ssl_https_support | Compile git with https support
** dns_spf_record | DNS SPF record
** recentchanges-url|recentchanges
** randompage-url|randompage
** helppage|help
* SEARCH
* TOOLBOX
* LANGUAGES

Dns spf record

2018-03-15T11:46:16Z

Admin: Created page with "This one is working so far so good... <pre> v=spf1 a mx ip4:87.236.196.25 ip6:2a01:5f0:c001:106:59:0:2:3 -all </pre>"

This one is working so far so good...

<pre>
v=spf1 a mx ip4:87.236.196.25 ip6:2a01:5f0:c001:106:59:0:2:3 -all
</pre>

MediaWiki:Sidebar

2018-03-15T11:45:38Z

Admin:

* navigation
** mainpage|mainpage-description
** Zello_android_vox | Zello Android VOX
** VirtualHost_reverse_proxy|Apache vhost
** Add_this_to_Your_vimrc|Basic vimrc modification
** firewalld_rich_rule|Firewalld rich rule
** change_apache_umask_for_modified_files|Change Apache umask for modified files
** wordpress_obvious_workaround|Wordpress obvious workaround
** squid_proxy|Squid proxy
** mongodb|MongoDB
** apache_https_www | Apache http to s and www to non-www
** esxi_mac_error | ESXi MAC Address error
** windows_putty_ssh_tunnel | Windows PuTTY SSH Tunnel
** fail2ban_unban_ip | fail2ban unban IP address
** linux_proxy_variables | Linux Proxy variables
** pysnmp_otheroids | PySNMP do not dive to other OIDs
** compile_git_with_ssl_https_support | Compile git with https support
** dns_spf_record | DNS SPF record
** recentchanges-url|recentchanges
** randompage-url|randompage
** helppage|help
* SEARCH
* TOOLBOX
* LANGUAGES

Firewalld rich rule

2018-03-12T13:43:21Z

Admin:

= Firewalld rich rule example=

Allow connection to IP address and specific port only from specified source IP.

<pre style="white-space: pre-wrap;">
firewall-cmd --add-rich-rule='rule family="ipv6" source NOT address="2a01:5f0:c001:106:59:0:2:6" destination address="2a01:5f0:c001:106:59:0:2:30" port port="443" protocol="tcp" reject' --permanent --zone="public"
</pre>

NOTE: This rule is actually used here in Boldcore for communication between Web server and reverse proxy.
So, only reverse proxy can access the web server.

Where: 
Address 2a01:5f0:c001:106:59:0:2:6 is source address (reverse proxy) 
Address 2a01:5f0:c001:106:59:0:2:30 is destination address (web server)

MediaWiki:Sidebar

2018-03-02T13:35:36Z

Admin:

* navigation
** mainpage|mainpage-description
** Zello_android_vox | Zello Android VOX
** VirtualHost_reverse_proxy|Apache vhost
** Add_this_to_Your_vimrc|Basic vimrc modification
** firewalld_rich_rule|Firewalld rich rule
** change_apache_umask_for_modified_files|Change Apache umask for modified files
** wordpress_obvious_workaround|Wordpress obvious workaround
** squid_proxy|Squid proxy
** mongodb|MongoDB
** apache_https_www | Apache http to s and www to non-www
** esxi_mac_error | ESXi MAC Address error
** windows_putty_ssh_tunnel | Windows PuTTY SSH Tunnel
** fail2ban_unban_ip | fail2ban unban IP address
** linux_proxy_variables | Linux Proxy variables
** pysnmp_otheroids | PySNMP do not dive to other OIDs
** compile_git_with_ssl_https_support | Compile git with https support
** recentchanges-url|recentchanges
** randompage-url|randompage
** helppage|help
* SEARCH
* TOOLBOX
* LANGUAGES

Compile git with ssl https support

2018-03-02T13:05:25Z

Admin:

=Compile git with https support=

After installing git from source code, I encountered with the following error when trying to clone (or whatever) repository from https.
<pre>fatal: Unable to find remote helper for 'https'</pre>
Root cause of this issue is, that by default git is not compiled with openssl support.

''Of course, first You need to have gcc, openssl-devel, autoconf, etc...'' But let's get to the point.

==Command==
I found the solution here: 
http://kamituel.tumblr.com/post/40678251617/fix-for-git-error-fatal-unable-to-find-remote 
https://gist.github.com/kamituel/4542056

<pre>
yum install expat expat-devel openssl openssl-devel gcc autoconf
yum remove git

wget https://github.com/git/git/archive/v2.16.2.tar.gz (check for the latest version first !!)
tar xvf v2.16.2.tar.gz
cd v2.16.2
./configure --with-expat --with-openssl --prefix=/usr/local
make
make install
</pre>

Compile git with ssl https support

2018-03-02T13:05:16Z

Admin:

=Compile git with https support=

After installing git from source code, I encountered with the following error when trying to clone (or whatever) repository from https.
<pre>fatal: Unable to find remote helper for 'https'</pre>
Root cause of this issue is, that by default git is not compiled with openssl support.

''Of course, first You need to have gcc, openssl-devel, autoconf, etc...'' But let's get to the point.

==Command==
I found the solution here:
http://kamituel.tumblr.com/post/40678251617/fix-for-git-error-fatal-unable-to-find-remote 
https://gist.github.com/kamituel/4542056

<pre>
yum install expat expat-devel openssl openssl-devel gcc autoconf
yum remove git

wget https://github.com/git/git/archive/v2.16.2.tar.gz (check for the latest version first !!)
tar xvf v2.16.2.tar.gz
cd v2.16.2
./configure --with-expat --with-openssl --prefix=/usr/local
make
make install
</pre>

Compile git with ssl https support

2018-03-02T13:05:05Z

Admin: Created page with "=Compile git with https support= After installing git from source code, I encountered with the following error when trying to clone (or whatever) repository from https. <pre>..."

=Compile git with https support=

After installing git from source code, I encountered with the following error when trying to clone (or whatever) repository from https.
<pre>fatal: Unable to find remote helper for 'https'</pre>
Root cause of this issue is, that by default git is not compiled with openssl support.

''Of course, first You need to have gcc, openssl-devel, autoconf, etc...'' But let's get to the point.

==Command==
I found the solution here:
http://kamituel.tumblr.com/post/40678251617/fix-for-git-error-fatal-unable-to-find-remote
https://gist.github.com/kamituel/4542056

<pre>
yum install expat expat-devel openssl openssl-devel gcc autoconf
yum remove git

wget https://github.com/git/git/archive/v2.16.2.tar.gz (check for the latest version first !!)
tar xvf v2.16.2.tar.gz
cd v2.16.2
./configure --with-expat --with-openssl --prefix=/usr/local
make
make install
</pre>

Firewalld rich rule

2018-03-02T12:55:53Z

Admin:

= Firewalld rich rule example=

Allow connection to IP address and specific port only from specified source IP.

<pre style="white-space: pre-wrap;">
firewall-cmd --add-rich-rule='rule family="ipv6" source NOT address="2a01:5f0:c001:106:59:0:2:6" destination address="2a01:5f0:c001:106:59:0:2:30" port port="443" protocol="tcp" log level="info" reject' --permanent --zone="public"
</pre>

NOTE: This rule is actually used here in Boldcore for communication between Web server and reverse proxy.
So, only reverse proxy can access the web server.

Where: 
Address 2a01:5f0:c001:106:59:0:2:6 is source address (reverse proxy) 
Address 2a01:5f0:c001:106:59:0:2:30 is destination address (web server)

MediaWiki:Sidebar

2018-03-02T11:34:11Z

Admin:

* navigation
** mainpage|mainpage-description
** Zello_android_vox | Zello Android VOX
** VirtualHost_reverse_proxy|Apache vhost
** Add_this_to_Your_vimrc|Basic vimrc modification
** firewalld_rich_rule|Firewalld rich rule
** change_apache_umask_for_modified_files|Change Apache umask for modified files
** wordpress_obvious_workaround|Wordpress obvious workaround
** squid_proxy|Squid proxy
** mongodb|MongoDB
** apache_https_www | Apache http to s and www to non-www
** esxi_mac_error | ESXi MAC Address error
** windows_putty_ssh_tunnel | Windows PuTTY SSH Tunnel
** fail2ban_unban_ip | fail2ban unban IP address
** linux_proxy_variables | Linux Proxy variables
** pysnmp_otheroids | PySNMP do not dive to other OIDs
** compile_git_with_ssl_https_support | Compile git with https support
** firewall_config_x11_forwarding | firewall-config X11 forwarding
** recentchanges-url|recentchanges
** randompage-url|randompage
** helppage|help
* SEARCH
* TOOLBOX
* LANGUAGES

Main Page

2018-02-05T08:22:10Z

Admin:

MediaWiki:Sidebar

2017-12-31T17:57:17Z

Admin:

Zello android vox

2017-12-31T17:56:12Z

Admin:

=Zello Android VOX Support=

==Intro==
Zello is frequently used to link two-way radios with mobile phones or computers via the Internet.
TX and RX is usually controlled using VOX, which is NOT ideal, but very simple to implement. (You just need a passive cable)

Of course, VOX must be supported and configured on both sides; Zello and two-way radio transceiver.

===VOX feature in Zello===
Is only available in desktop PC app, which makes the whole system very complicated, vulnerable and a little more expensive.

For PC setup You need:
* PC w/ Windows
* License for Windows
* UMTS/LTE modem
* Router w/ USB modem support
* Audio Cable
* Two-way transceiver
* Low-noise power supply

Luckily, Zello is available for Android. Unfortunately, VOX feature is NOT available.

For Android phone setup You need:
* Android phone
* Audio Cable
* Two-way transceiver
* Low-noise power supply
* My naughty workaround to enable VOX feature

==TLDR --->> Enable VOX for Zello Android app <<--- ==
Step-by-step:

* Open Android Market and download application "Automate"
* Tap on menu icon (three gray vertical squares), tap "Import"
* [http://subory.boldcore.eu/prod_VOX.flo Import this workflow (click to download)]
* Tap on workflow called VOX, tap start
* Open Zello app, open contact where You want to broadcast. (screen with large MIC button)
* Test it like me on Youtube
* If it works don't touch it. Get away, leave it alone. OR Send me a message, try to fix it ;))

Final setup:
https://www.youtube.com/watch?v=n8xn8kWucDk

==Troubleshooting==
Check these:

* Automatic screen locking
* Insufficient permissions for Zello and Automate
* Automate sleeps in background

==How I managed to make this work ?==

Here is some official documentation:

https://support.zellowork.com/hc/en-us/articles/207385198-Zello-PTT-Button-Partner-Technical-Integration

© Jaroslav Henzely 2017

Zello android vox

2017-12-31T17:53:12Z

Admin:

=Zello Android VOX Support=

==Intro==
Zello is frequently used to link two-way radios with mobile phones or computers via the Internet.
TX and RX is usually controlled using VOX, which is NOT ideal, but very simple to implement. (You just need a passive cable)

Of course, VOX must be supported and configured on both sides; Zello and two-way radio transceiver.

===VOX feature in Zello===
Is only available in desktop PC app, which makes the whole system very complicated, vulnerable and a little more expensive.

For PC setup You need:
* PC w/ Windows
* License for Windows
* UMTS/LTE modem
* Router w/ USB modem support
* Audio Cable
* Two-way transceiver
* Low-noise power supply

Luckily, Zello is available for Android. Unfortunately, VOX feature is NOT available.

For Android phone setup You need:
* Android phone
* Audio Cable
* Two-way transceiver
* Low-noise power supply
* My naughty workaround to enable VOX feature

==TLDR --->> Enable VOX for Zello Android app <<--- ==
Step-by-step:

* Open Android Market and download application "Automate"
* Tap on menu icon (three gray vertical squares), tap "Import"
* [http://subory.boldcore.eu/prod_VOX.flo Import this workflow (click to download)]
* Tap on workflow called VOX, tap start
* Open Zello app, open contact where You want to broadcast. (screen with large MIC button)
* Test it like me on Youtube
* If it works don't touch it. Get away, leave it alone. OR Send me a message, try to fix it ;))

==Troubleshooting==
Check these:

* Automatic screen locking
* Insufficient permissions for Zello and Automate
* Automate sleeps in background

Zello android vox

2017-12-31T17:51:28Z

Admin:

=Zello Android VOX Support=

==Intro==
Zello is frequently used to link two-way radios with mobile phones or computers via the Internet.
TX and RX is usually controlled using VOX, which is NOT ideal, but very simple to implement. (You just need a passive cable)

Of course, VOX must be supported and configured on both sides; Zello and two-way radio transceiver.

===VOX feature in Zello===
Is only available in desktop PC app, which makes the whole system very complicated, vulnerable and a little more expensive.

For PC setup You need:
* PC w/ Windows
* License for Windows
* UMTS/LTE modem
* Router w/ USB modem support
* Audio Cable
* Two-way transceiver
* Low-noise power supply

Luckily, Zello is available for Android. Unfortunately, VOX feature is NOT available.

For Android phone setup You need:
* Android phone
* Audio Cable
* Two-way transceiver
* Low-noise power supply
* My naughty workaround to enable VOX feature

==TLDR --->> Enable VOX for Zello Android app <<--- ==
Step-by-step:

* Open Android Market and download application "Automate"
* Tap on menu icon (three gray vertical squares), tap "Import"
* [[http://subory.boldcore.eu/prod_VOX.flo]|[Import this workflow (click to download)]]
* Tap on workflow called VOX, tap start
* Open Zello app, open contact where You want to broadcast. (screen with large MIC button)
* Test it like me on Youtube
* If it works don't touch it. Get away, leave it alone. OR Send me a message, try to fix it ;))

==Troubleshooting==
Check these:

* Automatic screen locking
* Insufficient permissions for Zello and Automate
* Automate sleeps in background

Zello android vox

2017-12-31T17:51:01Z

Admin:

=Zello Android VOX Support=

==Intro==
Zello is frequently used to link two-way radios with mobile phones or computers via the Internet.
TX and RX is usually controlled using VOX, which is NOT ideal, but very simple to implement. (You just need a passive cable)

Of course, VOX must be supported and configured on both sides; Zello and two-way radio transceiver.

===VOX feature in Zello===
Is only available in desktop PC app, which makes the whole system very complicated, vulnerable and a little more expensive.

For PC setup You need:
* PC w/ Windows
* License for Windows
* UMTS/LTE modem
* Router w/ USB modem support
* Audio Cable
* Two-way transceiver
* Low-noise power supply

Luckily, Zello is available for Android. Unfortunately, VOX feature is NOT available.

For Android phone setup You need:
* Android phone
* Audio Cable
* Two-way transceiver
* Low-noise power supply
* My naughty workaround to enable VOX feature

==TLDR --->> Enable VOX for Zello Android app <<--- ==
Step-by-step:

* Open Android Market and download application "Automate"
* Tap on menu icon (three gray vertical squares), tap "Import"
* [http://subory.boldcore.eu/prod_VOX.flo|[Import this workflow (click to download)]]
* Tap on workflow called VOX, tap start
* Open Zello app, open contact where You want to broadcast. (screen with large MIC button)
* Test it like me on Youtube
* If it works don't touch it. Get away, leave it alone. OR Send me a message, try to fix it ;))

==Troubleshooting==
Check these:

* Automatic screen locking
* Insufficient permissions for Zello and Automate
* Automate sleeps in background

Zello android vox

2017-12-31T17:50:36Z

Admin:

=Zello Android VOX Support=

==Intro==
Zello is frequently used to link two-way radios with mobile phones or computers via the Internet.
TX and RX is usually controlled using VOX, which is NOT ideal, but very simple to implement. (You just need a passive cable)

Of course, VOX must be supported and configured on both sides; Zello and two-way radio transceiver.

===VOX feature in Zello===
Is only available in desktop PC app, which makes the whole system very complicated, vulnerable and a little more expensive.

For PC setup You need:
* PC w/ Windows
* License for Windows
* UMTS/LTE modem
* Router w/ USB modem support
* Audio Cable
* Two-way transceiver
* Low-noise power supply

Luckily, Zello is available for Android. Unfortunately, VOX feature is NOT available.

For Android phone setup You need:
* Android phone
* Audio Cable
* Two-way transceiver
* Low-noise power supply
* My naughty workaround to enable VOX feature

==TLDR --->> Enable VOX for Zello Android app <<--- ==
Step-by-step:

* Open Android Market and download application "Automate"
* Tap on menu icon (three gray vertical squares), tap "Import"
* [http://subory.boldcore.eu/prod_VOX.flo|Import this workflow (click to download)]
* Tap on workflow called VOX, tap start
* Open Zello app, open contact where You want to broadcast. (screen with large MIC button)
* Test it like me on Youtube
* If it works don't touch it. Get away, leave it alone. OR Send me a message, try to fix it ;))

==Troubleshooting==
Check these:

* Automatic screen locking
* Insufficient permissions for Zello and Automate
* Automate sleeps in background

Zello android vox

2017-12-31T17:50:01Z

Admin:

=Zello Android VOX Support=

==Intro==
Zello is frequently used to link two-way radios with mobile phones or computers via the Internet.
TX and RX is usually controlled using VOX, which is NOT ideal, but very simple to implement. (You just need a passive cable)

Of course, VOX must be supported and configured on both sides; Zello and two-way radio transceiver.

===VOX feature in Zello===
Is only available in desktop PC app, which makes the whole system very complicated, vulnerable and a little more expensive.

For PC setup You need:
* PC w/ Windows
* License for Windows
* UMTS/LTE modem
* Router w/ USB modem support
* Audio Cable
* Two-way transceiver
* Low-noise power supply

Luckily, Zello is available for Android. Unfortunately, VOX feature is NOT available.

For Android phone setup You need:
* Android phone
* Audio Cable
* Two-way transceiver
* Low-noise power supply
* My naughty workaround to enable VOX feature

==TLDR --->> Enable VOX for Zello Android app <<--- ==
Step-by-step:

* Open Android Market and download application "Automate"
* Tap on menu icon (three gray vertical squares), tap "Import"
* [[Import this workflow (click to download)|http://subory.boldcore.eu/prod_VOX.flo]]
* Tap on workflow called VOX, tap start
* Open Zello app, open contact where You want to broadcast. (screen with large MIC button)
* Test it like me on Youtube
* If it works don't touch it. Get away, leave it alone. OR Send me a message, try to fix it ;))

==Troubleshooting==
Check these:

* Automatic screen locking
* Insufficient permissions for Zello and Automate
* Automate sleeps in background